ATTENTION!!! In the course of the next 2-3 months this store will be replaced by: https://www.burchard-customparts.com Please request your new access data now and switch to the new system!
Close filters
 
  •  
  •  
from to
  •  
  •  
2 From 5
No results were found for the filter!
HH220-216
Highway Hawk HIGHSIDER CNC aluminum turn signal holder chrome for turn signals with M8 threaded bolt (1 set)
Highway Hawk HIGHSIDER CNC aluminum turn signal bracket chrome for turn signals with M8 threaded bolt (1 set) Scope of delivery: 1 pair
€19.62 *
HH220-220
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE1 black (1 piece)
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE1 black For mounting headlights with lower mounting. Suitable for forks with a width of 180 mm to 220 mm (measured from fork stand tube center to fork stand tube center). Holder dimensions: Total width: 217 mm Width: 200 mm (from mounting to mounting) Depth: 37 mm Height: 15 mm Scope of delivery: 1 piece
€44.21 *
HH220-221
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE1 chrome (1 piece)
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE1 chrome For mounting headlights with lower mounting. Suitable for forks with a width of 180 mm to 220 mm (measured from fork stand tube center to fork stand tube center). Holder dimensions: Total width: 217 mm Width: 200 mm (from mounting to mounting) Depth: 37 mm Height: 15 mm Scope of delivery: 1 piece
€44.21 *
HH220-222
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE2 black (1 piece)
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE2 black For mounting headlights with lower mounting. Suitable for forks with a width of 205 mm to 245 mm (measured from fork stand tube center to fork stand tube center). Holder dimensions: Total width: 240 mm Width: 255 mm (from mounting to mounting) Depth: 37 mm Height: 15 mm Scope of delivery: 1 piece
€44.21 *
HH220-223
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE2 chrome (1 piece)
HIGHSIDER CNC aluminum headlight holder BOTTOM TYPE2 chrome For mounting headlights with lower mounting. Suitable for forks with a width of 205 mm to 245 mm (measured from fork stand tube center to fork stand tube center). Holder dimensions: Total width: 240 mm Width: 255 mm (from mounting to mounting) Depth: 37 mm Height: 15 mm Scope of delivery: 1 piece
€44.21 *
HH207-361
HIGHSIDER CNC aluminum handlebar clamp, 7/8 inch - M6, chrome (1 piece)
HIGHSIDER CNC aluminum handlebar clamp chrome for 7/8 inch handlebar Dimensions: Width: 12 mm Height: 47 mm Depth: 31 mm Internal thread: M6 x 1 mm Scope of delivery: 1 piece
€14.71 *
HH207-402
HIGHSIDER CNC aluminum standpipe clamps, for 35-37 mm, black, (1 set)
HIGHSIDER CNC aluminum standpipe clamps CNC machined, black aluminum clamps for standpipes with a diameter of 35 mm to 37 mm. Dimensions: Inner diameter: 37 mm, incl. insert strips reducible to 36 mm and 35 mm. Scope of delivery: 1 pair Note: Matching lamp holder set: Item no. 220-602
€40.08 *
HH207-403
HIGHSIDER CNC aluminum standpipe clamps, for 35-37 mm, chrome, (1 set)
HIGHSIDER CNC aluminum standpipe clamps CNC machined, chrome aluminum clamps for standpipes with a diameter of 35 mm to 37 mm. Dimensions: Inner diameter: 37 mm, incl. insert strips reducible to 36 mm and 35 mm. Scope of delivery: 1 pair Note: Matching lamp holder set: Item no. 220-602
€40.08 *
HH207-404
HIGHSIDER CNC aluminum standpipe clamps, for 38-41 mm, black, (1 set)
HIGHSIDER CNC aluminum standpipe clamps CNC machined, black aluminum clamps for standpipes with a diameter of 38 mm to 41 mm. Dimensions: Inner diameter: 41 mm, incl. insert strips reducible to 40 mm, 39 and 38 mm. Scope of delivery: 1 pair Note: Matching lamp holder set: Item no. 220-604
€40.08 *
HH207-405
HIGHSIDER CNC aluminum standpipe clamps, for 38-41 mm, chrome, (1 set)
HIGHSIDER CNC aluminum standpipe clamps CNC machined, chrome aluminum clamps for standpipes with a diameter of 38 mm to 41 mm. Dimensions: Inner diameter: 41 mm, incl. insert strips reducible to 40 mm, 39 and 38 mm. Scope of delivery: 1 pair Note: Matching lamp holder set: Item no. 220-605
€44.95 *
HH207-408
HIGHSIDER CNC aluminum standpipe clamps, for 42-43 mm, black, (1 set)
HIGHSIDER CNC aluminum standpipe clamps CNC machined, black aluminum clamps for standpipes with a diameter of 42 mm to 43 mm. Dimensions: Inner diameter: 43 mm, incl. insert strips reducible to 42mm Scope of delivery: 1 pair Note: Matching lamp holder set: Item no. 220-608
€40.08 *
HH207-409
HIGHSIDER CNC aluminum standpipe clamps, for 42-43 mm, chrome , (1 set)
HIGHSIDER CNC aluminum standpipe clamps CNC machined, chrome aluminum clamps for standpipes with a diameter of 42 mm to 43 mm. Dimensions: Inner diameter: 43 mm, incl. insert strips reducible to 42mm Scope of delivery: 1 pair Note: Matching lamp holder set: Item no. 220-608
€40.08 *
2 From 5
Viewed