Lowering Kits For Shock Absorbers Honda VT 600 Shadow WITHOUT TÜV

Shock absorber lowering WITHOUT TÜV

for

Honda VT 600 Shadow / PC21

By the conversion the motorcycle is lowered by approx. 4,5 cm (measured above the rear wheel centre)

Material Galvanized Steel

The lowering kit is delivered with all parts required for assembly. Attention to the conversion you need a spring tensioner

Mounting NOTE:

1. Squeeze Spring with spring tensioner
2. Unscrew the shock absorber head
3. Relieve the spring tension and remove the spring
4. Push the large ring over shock absorber housing
5. Remove the old stop Bush from the piston rod, slide the supplied plastic bushing over the piston rod
6. Push the spring and press it together with the spring tensioner
7. Screw new Shock absorber head, relieve spring
8. Take the Bush from the old shock absorber head and re-press into the new one

You can also let us done the shock absorber conversion. The original shock absorber must be sent to us for conversion.
In addition, please order the service "shock absorber lowering for MB00-1080-MB00-1081-MB00-3050-H472-0065".

The shock absorbers are lowered by us.

All submitted shock absorber changes are guaranteed to be completed within 24 hours.

All removable parts are available as spare parts.