Top seller
No results were found for the filter!
Highway Hawk Handlebar "X-Wide" 900 mm wide for "7/8" (22 mm) clamping chrome TÜV Lenker "X-Wide" - "7/8" (22 mm) mit TÜV Teilegutachten §19/3 Breite: 900 mm Tiefe: 120 mm Klemmbreite: 320 mm Lenkerbreite Unterkante: ca. 330mm Material: Stahl Oberfläche: Hochglanz verchromt Mit Teilegutachten nach §19/3. Für Fahrzeuge die nicht mit im Gutachten aufgeführt sind, steht folgender Hinweis im Gutachten: Wird der Sonderlenker an einem Fahrzeug montiert, welches...
€60.04 *
Highway Hawk Handlebar "X-Wide" 800 mm wide for "7/8" clamping chrom TÜV Handlebar "X-Wide" - "7/8" (22 mm) with TÜV Test Report §19/3 Wide: 800 mm Depth: 100 mm Handlebar width lower edge: approx. 240mm Material: Steel Finish: Chrome With TÜV Test Report §19/3 Yamaha XV 1000 Virago / 2AE For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed...
€59.30 *
Highway Hawk Handlebar "X-Wide" 900 mm wide for "1" (25,4 mm) clamping with 3 holes dull black TÜV Handlebar "X-Wide" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 900 mm Depth: 120 mm Clamping wide: 320 mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki / Intruder...
€64.76 *
Highway Hawk Handlebar "Z-Bar Extreme" 630 mm wide 300 mm high for "1" (25,4 mm) clamping with 3 holes chrome TÜV Handlebar "Z-Bar Extreme" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 630 mm High: 300 mm Depth: 185 mm Clamping wide: 220 mm Material: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58...
€258.27 *
Highway Hawk Handlebar "Z-Bar Extreme" 630 mm wide 300 mm high for "1" (25,4 mm) clamping with 3 holes dull black TÜV Handlebar "Z-Bar Extreme" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 630 mm High: 300 mm Depth: 185 mm Clamping wide: 220 mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58...
€219.53 *
Highway Hawk Handlebar "Bad Hawk" 845 mm wide 370 mm high for "1" (25,4 mm) clamping with 3 holes dull black TÜV Handlebar "Bad Hawk" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 845 mm High: 370 mm Depth: 210 mm Clamping wide: 160 mm Handlebarwidth lower edge: approx. 200mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€77.43 *
Highway Hawk Handlebar "X-Wide" 800 mm wide for "1" (25,4 mm) clamping with 3 holes dull black TÜV Handlebar "X-Wide" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 800 mm Depth: 100 mm Clamping wide: 250 mm Handlebar width lower edge: approx. 200mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53...
€76.29 *
Highway Hawk Handlebar "Bad Hawk" 825 mm wide 355 mm high for "1" (25,4 mm) clamping with 3 holes chrome TÜV Handlebar "Bad Hawk" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 825 mm High: 355mm Depth: 240 mm Clamping wide: 165 mm Handlebar width lower edge: approx. 305mm Material: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€100.15 *
Highway Hawk Handlebar "Bad Hawk" 825mm wide 335 mm high for "1" (25,4 mm) clamping with 3 holes dull black TÜV Handlebar "Bad Hawk" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 825 mm High: 335 mm Depth: 240 mm Clamping wide: 165 mm Handlebar width lower edge: approx. 305mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€70.95 *
Highway Hawk Handlebar "Flyer Wide" 1000 mm wide for "1" (25,4 mm) clamping with 3 holes dull black TÜV Handlebar "Flyer Wide" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 1000 mm Depth: 200 mm High: 60 mm Clamping wide: 190 mm Handlebar width lower edge: approx. 370mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2,...
€70.77 *
Highway Hawk Handlebar "Flyer Wide" 1000 mm wide for "1" (25,4 mm) clamping with 3 holes chrome TÜV Handlebar "Flyer Wide" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 1000 mm Depth: 200 mm High: 60 mm Clamping wide: 190 mm Material: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki...
€79.42 *
Highway Hawk Handlebar "Fat Flyer" 1000 mm wide for "1" (25,4 mm) clamping with 3 holes dull black TÜV Handlebar "Flyer Wide" - "1" (25,4 mm) with TÜV Test Report §19/3 Tube diameter 32mm. The clamping and the handle ends are reduced to 25.40mm / 1 ". Wide: 1000 mm Depth: 170 mm Height: 60 mm Clamping wide: 130 mm Handlebar width lower edge: approx. 330mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With...
€116.58 *
Viewed